搜索
确认
取消

Market & News

 

Check category

[Lamp installation skills] How to install recessed lamps

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2020-07-21 14:13
  • Views:

(Summary description)

[Lamp installation skills] How to install recessed lamps

(Summary description)

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2020-07-21 14:13
  • Views:
Information
[Lamp installation skills] How to install recessed lamps?
 
Recessed luminaires are often used when choosing lamps for home decoration, such as living room, kitchen, bathroom, etc. Recessed luminaires are used. Because the appearance of recessed luminaires is flat and the lamps will not protrude, many people like to use them when decorating. Recessed lamps. Let's take a look at the installation skills and precautions of recessed lamps!
 
Installation skills of recessed lamps:
 
1. Opening on the ceiling: When designing the ceiling grille, the position of the embedded lamps should be considered. At the ceiling lamp, the grille is made into a hole frame with the outer size of the lamp. This frame can be used as the installation and connection structure of the lamp, and can also be used as the closing structure of the ceiling surface layer. When installing large recessed lamps, the frame of the opening should be reinforced.
 
2. Hanging ribs are connected to the lamps and lanterns: If large recessed lamps are to be installed on the surface of the ceiling, they need to be installed from the structural layer. The hanging ribs can be buried during the construction of the floor slab, and the position of the buried ribs is accurate, but it is difficult to ensure the accuracy of the lamp installation position during construction. In this regard, another grille can be hung at the lamp installation position, so that the upper part of the grille is connected with the hanging ribs and the lower part is connected with the support frame on the lamp. This is safe and accurate in position.
 
3. Assembling recessed lamps: The so-called "assembled recessed lamps" is to use ordinary fluorescent lamps, incandescent lamps, etc., plus grid glass, plexiglass or plastic crystal sheets, etc., to assemble large lamps with various patterns.
 
Precautions for installation of recessed lamps:
 
1. The most basic requirement for the installation of recessed lamps is to be firm, and the metal shell of the lamps should be grounded to ensure safe use;
 
2. For the lamp holder with switch, for safety, the handle should not have exposed metal parts at the beginning;
 
3. When installing low-footed lamp holders in bathrooms and kitchens, porcelain screw-mouthed low-footed lamp holders should be used. The wiring and phase wire (switch wire) of the screw lamp holder should be connected to the center contact terminal, and the neutral wire should be connected to the screw terminal;
 
4. When installing recessed lamps, the dark wires in the ceiling or wall panels must be protected by flame-retardant casings;
 
5. When installing recessed lamps on the decorative ceiling, install them according to the requirements of the lamp installation instructions. When the weight of the lamp is greater than 3kg, it should be installed with a pre-embedded hook or an expansion bolt from the roof to directly fix the support and hanger, and the wire from the lamp box box should be protected to the lamp position with a hose to prevent the wire from being exposed in the flat roof;
 
6. In addition to the careful and meticulous design of the installation of such lamps, the position of the lamps and the flatness of the decorative glass must also be grasped during construction;
 
The above is ([Lamp Installation Skills] How to install recessed lamps?) For more information, please follow the ("Golden Waterfront Optoelectronics") WeChat official account. If you have any questions, please contact online customer service.

Scan the QR code to read on your phone

Copyright Shenzhen Jinhaibin Optoelectronics Technology Co., Ltd .  粤ICP备13018288号 Powered by www.300.cn